What preparations need to be made before using the horizontal injection molding machine?

1. Stop heating each section of the barrel

This operation is to make the overall temperature of the equipment tend to a uniform stage. When the temperature of each section reaches the requirement, keep it warm for a period of time to make the mechanical temperature stable. The insulation time varies according to the requirements of different equipment and plastic raw materials.

2. Check the various components of the horizontal injection molding machine

The various components include the electrical control box and various moving parts of the injection molding machine. Among them, the electrical control box part needs to be checked, for example: whether there is oil or water in the electrical control box, and if the electrical appliance is damp, do not turn on the machine. The maintenance personnel should blow the electrical parts dry before turning on the machine. In addition, check whether there is lubricating oil in each moving part, because adding enough lubricating oil also has a great effect on the normal operation of the injection molding machine.

In fact, in addition to the above two parts, it is also necessary to check whether the power supply voltage is normal and whether the cooling pipe can be unobstructed for a long time. The injection molding machine manufacturer hopes that everyone can accurately stop checking these points before using the horizontal injection molding machine and make their own preparations.