Why does the electric cake jar not heat after being powered on

1. Why is the indicator light normal but not heating when the electric cake jar is powered on?
This situation may be due to the malfunction of the relay and heater circuit of the electric cake jar. People should unplug the plug of the electric cake jar, then open its bottom cover, and use a multimeter to measure the DC resistance value of the heater. The normal value should display 45 megabytes. After measurement, there were no abnormalities, indicating that it was not a heater issue. People checked the DC relay and repaired it if there were any problems.
2. Why is there no current when the electric cake jar is powered on?
If people keep using the electric cake jar frequently and keep it at a high temperature for a long time, it will cause the fuse of the electric cake jar to blow, ultimately resulting in no current passing through. The solution is to replace the fuse of the electric cake jar.
3. What should we do if the electric cake pan heats up slowly and unevenly?
Part of the electric heating tube of the electric cake jar was burnt out. After disconnecting the power supply, people dismantled the electric cake jar and found the heating tube. Then, they replaced it and adjusted the voltage to maintain a reasonable range to prevent excessive voltage from burning the electric heating tube.
4. What should I do if the electric cake pan is not heated after being powered on?
This situation is caused by water entering the electrical components inside the electric cake jar, causing it to short-circuit. If people continue to use it, it can cause the electric cake jar to smoke or even catch fire. At this point, people should immediately stop using it and let it sit for a week before using it. This time is enough for the moisture inside the electric cake jar to dry.
5. What should we do when the temperature of the electric cake cake is high or low?
There are many reasons why the temperature of the electric cake jar varies from high to low, such as the contact adhesion of the relay, the rot between the transistor collector and emitter, damage to the temperature regulating element, and internal holes in the diode.

The above content is organized by Superb heater Company, super heater. Mainly professional production: industrial heating elements, temperature measuring elements, production equipment, accessories, and raw materials such as tubular heaters, tubular heaters, belt heaters, ceramic heaters, silicone rubber heaters, thermocouples, etc.

Welcome global industry partners to discuss cooperation!