Working principle of oil drum heating belt in paraffin wax

Working principle of oil drum heating belt in paraffin wax

The oil barrel heating belt makes it easy to remove the liquid and solidified substances in the barrel through heating, such as adhesives, grease, asphalt, paint, paraffin, oil, and various resin raw materials in the barrel. By heating the barrel body, the viscosity decreases uniformly, reducing the power of the pump. Therefore, this device is not affected by seasonal factors and can be used year-round.

The oil drum heater is used for heating, tracing, and insulation of drum like equipment such as tank bodies, pipelines, etc. It can be directly wrapped around the heated part for easy installation and disassembly. Especially suitable for the dissolution of paraffin and preventing wax formation of oil objects in winter. The surface temperature of the heater when suspended in still air at 20 degrees Celsius is 150 degrees Celsius. The temperature of the heater may vary depending on the environment used, the material and shape of the heated object.

This device relatively lengthens the length of the experimental working section and can be used for long-distance transportation simulation experiments. The increase in the bending radius of the experimental loop neutralizes the influence of centrifugal and centripetal forces on the conveying medium. Can adjust the temperature of the conveying medium and pipeline. Research can be conducted on the impact of uphill or downhill on oil mixing parameters.

The overlapping and twisted zigzag closed steel ring is arranged in order of pump valve section, working section, and temperature compensation section. The pipes between the working section, temperature compensation section, and pressure pump and regulating valve are wrapped with thermal conductive adhesive, and the electric heating belt and refrigeration pipe are wrapped axially along the loop inside the thermal conductive adhesive. The thermal insulation layer is wrapped on the outer side of the thermal conductive adhesive, and non-contact flow meters, multiple non-contact color testers, and multiple temperature sensors are installed on the working section.

Www.superbheater.com