Injection Molding Heatng Element
Mica, ceramic, microtubular, and sealed types of injection molding heating elements are all readily accessible. The principal molding apparatus for thermoplastic or thermosetting polymers used in the production of plastic items in a variety of forms is an injection molding machine with heating...
Description
Mica, ceramic, microtubular, and sealed types of injection molding heating elements are all readily accessible. The principal molding apparatus for thermoplastic or thermosetting polymers used in the production of plastic items in a variety of forms is an injection molding machine with heating elements.
The injection molding heating element is generally used as the main heating device on the injection molding machine barrel, installed on the outside of the barrel, and segmented detection by thermocouple. When heat products heat through the cylinder wall, it provides heat source for material plasticizing.
Technical Information:
| Heater Material: | Copper, SS430, SS304,Cast Aluminum, Cas copper, Ceramic |
| Insulation Material: |
Imported high-temperature mica |
| Resistance Wire: |
Ni80Cr200 |
| Electrical Property: |
≤0.5mA |
| Wattage Tolerance: |
+5% - 10% |
| Input Voltage And Wattage | To be customized as request |
| Specification: | To be customized as request |
Applications:
1. Plastic processing machinery
2. Injection and blow moulding
3. Extruders
4. Hot runner bushings
When ordering please specify:
1. Inside diameter and width of the heater
2. Construction type
3. Wattage and voltage
4. Type of terminal
5. Drawing where special type of holes or cutouts required
Send Inquiry
You Might Also Like
