Automatic terminal machines should be kept dry, tidy, well ventilated, and in good condition

Automatic terminal machines should be kept dry, tidy, well ventilated, and in good condition

At present, domestic automatic terminal machine equipment can achieve about 7000 pieces of wire cutting and 11000 pieces of terminal pressing per hour. During the period, 3500 pieces are parallel line pressing terminals, and 7500 pieces are single line pressing terminals. It can automatically detect the quality of terminal pressing and has the functions of the three types of automatic terminal machines mentioned above. It is currently one of the highly automated terminal machines in the domestic market. The automatic terminal machine is controlled by PLC or microcontroller, with servo motor or stepper motor providing power. The production process does not require manual intervention, resulting in high production efficiency.

The automatic terminal machine should be kept dry, tidy, ventilated, and in good condition. At the same time, strong acids and alkalis should not be placed around to avoid volatilization and further accelerate the corrosion of the equipment during long-term storage. For mechanical equipment, such as engine oil, it is necessary to thoroughly replace it and add the oil slowly to avoid corrosion inside the oil tank. For some parts that are prone to rusting, a thin layer of lubricating grease can also be added to prevent rusting.

Most air conditioners now have this function. Activating the dehumidification function of the air conditioner can effectively solve the problem of room humidity during rainy and cloudy periods, and can also provide comprehensive protection for automatic terminal machines. In areas with long-term humidity, we can use charcoal placed indoors or bamboo charcoal laid under the indoor floor, which has a very good effect on maintaining humidity balance, preventing dust and purifying the air. Generally, a good factory floor is covered with cardboard boxes.

When the automatic terminal machine in the factory is not in use, it can be better to add a protective cover, which can effectively prevent the rear of the electrical appliances from coming into contact with humid air, and also increase the frequency of using these appliances, because the machine generates heat during operation, which can effectively dissipate the humid air. If the computer cannot display due to humidity, it can be turned on and powered on, and the display will start working again in about ten minutes.

Www.superbheater.com