How to choose a heating tube for a disinfection cabinet?

If most of your tableware is made of melamine ceramics or plastic wood products, such as plates and plastic bowls in restaurants and fast food restaurants, you need to use an ozone disinfection cabinet. The letter starts with Y and the temperature is usually around 60 degrees Celsius. You need to dry the water from the tableware before putting it in for disinfection. Nowadays, opening a restaurant requires a disinfection cabinet to be approved by the health bureau. Usually, this is enough.
If you are a beauty salon or swimming pool that requires a disinfection cabinet to open, you cannot choose a tableware disinfection cabinet. You need to use a disinfection cabinet that specifically disinfects towels and clothing. This type of disinfection method usually combines ozone and ultraviolet radiation.
For household disinfected tableware, most of them adopt a combination disinfection design, and the initial letter Z is usually used for low-temperature disinfection on top, which is used for storing wooden chopsticks, plastic and other high-temperature resistant tableware. Below, high-temperature disinfection is used, and stainless steel and high-temperature resistant ceramic tableware are placed.
If you have an understanding of the place where the product is used, then look at the installation method, which is the second letter of the national standard model. There are mainly four methods: the first is the platform type T, which is the vertical disinfection cabinet we see on the market; The second type is embedded Q, which embeds urban kitchen decoration into the cabinet; The third type is wall mounted G, which is a disinfection cabinet hung on the wall; The fourth type of platform wall mounted dual purpose L. The third letter is the control method, which is divided into ordinary control P and computer control D.
Once again, take a look at the capacity of the disinfection cabinet and choose the one that suits your specifications. The capacity is represented by a number after three letters, in liters. The capacity label for each brand is different. When purchasing, pay attention to asking the merchant about the size of the product, and then compare it to determine which model to choose.
Finally, there is the choice of quality. The specifications of disinfection cabinets are diverse, but the prices of similar styles and materials are also different; Just like the stainless steel material in the sample, there are still significant differences in thickness. There are plates with thicknesses of 0.2MM, 0.3MM, 0.4MM, 0.5MM, 0.8MM, and other thicknesses. The layer racks are also divided into thin, thick, thick, galvanized, and non magnetic steel layer racks. The prices of these configurations are different, and even vary greatly. Therefore, we need to understand them, and most merchants also have descriptions; The selection of packaging is also very important. Disinfection cabinets belong to large area glass products, and safety is very important.