Manufacturers of air duct heaters should reduce the impact of vibration on pipelines and change the diameter of pipelines

Manufacturers of air duct heaters should reduce the impact of vibration on pipelines and change the diameter of pipelines

The machinery and equipment used by manufacturers of air duct heaters are popular in industries that require air drying and heating, despite rising temperatures, the application of air duct heaters in certain industries is still increasing. Some users have reported to us that the heater may vibrate during use, causing damage to the air electric heater. Everyone should know that vibration can exacerbate the wear of the electric heater pipes and baffles, leading to damage to the electric heater. We can change the impact of vibration on air electric heaters by the following methods:

1. The flow rate can be reduced by increasing the distance between the center of the pipeline.

2. Increasing wall thickness is also a measure to improve the vibration of electric air heaters. This method basically involves changing the natural frequency of the electric heater pipeline to reduce resonance caused by vibration. We can also change it by changing the diameter of the pipeline.

1. Raise the air temperature and design the air electric heater reasonably.

2. Reduce the pressure loss of the electric air heater itself. The air to be heated flows through the electric air heater, causing pressure loss. The greater the pressure loss, the greater the energy consumption of the fan. The innovation lies in improving the structure of the air electric heater itself to reduce pressure loss.

3. An electric air heater is installed on the surface of the insulation layer. In the use of air electric heaters, only the outlet pipe of the electric heater is insulated, and the surface of the heater itself is not subjected to heat treatment. Comparative data shows that adding insulation layers can reduce energy consumption by 5% -10%. It is very important to save energy consumption when the surface of an air electric heater operates for a long time. At the same time, the installation of insulation layers in pipelines has been widely used in scientific research and production laboratories such as aerospace, weapons industry, chemical industry, and higher education institutions. Especially suitable for automatic temperature control, high flow and high temperature combined systems and accessory testing.

In fact, the heating principle is well-known, just like how a household electric water heater heats the water temperature to its rated temperature. An air electric heater uses electrical energy to heat air. After heating, the air will naturally dry. The electric air heater has a wide range of applications: it can heat any gas, and the generated hot air is dry, non-conductive, non flammable, non explosive, non chemical corrosion, non polluting, safe and reliable. The temperature of the heated space is fast (controllable).

Www.superbheater.com