Rail type industrial oven;

Rail type industrial oven;

(1) Appearance: The external material is made of a 1.5mm thick cold plate bent, and the surface is sprayed with computer gray white. It is corrosion-resistant and rust resistant. The external dimensions are 2.4 meters wide, 1.08 meters deep, and 1.93 meters high (excluding the motor), with a double door and reinforced chrome plated square steel door lock. The bottom is equipped with casters and foot cups to facilitate the movement of the oven;

(2) Inner liner: The inner liner is made of 1.5mm thick 201 stainless steel sand plate, which is corrosion-resistant and easy to clean, making the furnace clean and dust-free. The inner liner size is 2 meters wide, 1.51 meters high, and 0.95 meters deep. 100mm thick high-temperature aluminum silicate insulation rock wool is laid around the inner liner, and high-temperature sealing embedded silicone strips are added around the door to prevent the temperature outside the furnace from getting hot

(3) Heating part: Equipped with Taiwan made stainless steel heat sink heating pipes on both sides of the furnace chamber, equipped with 2 0.75KW imported Shengjie brand air motors and 12 inch and a half inch air impeller on the top of the furnace chamber. The two sides circulate high air volume and force three side air supply, equipped with inlet and outlet valves, and can adjust the air flow rate to make the temperature inside the furnace more uniform.

(4) Electrical part: Power supply 380V, three-phase five wire system, power 24KW, using independent control box, control line extended to 10 meters, can be operated from a distance. Using RKC intelligent microcomputer intelligent LED digital temperature controller, using module continuous buffering output control heater, using contactor control output heater divided into two levels for heating (when the temperature reaches the set temperature value, the oven is in a constant temperature state, and one set of heaters can be turned off to reduce the power of the entire oven and achieve energy-saving effect). Disrupting the traditional zero crossing triggering method, which brings about significant current instantaneous impact and temperature control fluctuations, coupled with the E series 4-20MA output temperature controller with extremely high cost-effectiveness, it can make the output voltage change steadily and linearly, the temperature control effect is more stable, and the performance is superior. (The output power can be automatically adjusted according to the size of the temperature error), making the temperature more accurate. The temperature can be adjusted freely from room temperature to 150 ℃ (± 3 °), and the functions include PID self-tuning, automatic constant temperature control Automatic timing (equipped with high-precision digital display and adjustable 999 minutes/hour automatic timer) with manual and automatic timing switch selection. It has functions such as timed alarm and power off, over temperature power off, and leakage protection circuit breaker when the temperature reaches. The timing and over temperature alarm and signal indicator lights are controlled and displayed separately, using dual temperature controllers for control. The unique over temperature design is equipped with an over temperature upper limit temperature control point to prevent damage to the product due to the main temperature controller losing control, Make the temperature more precise, with an internal temperature difference of ± 3 degrees. All other electrical appliances are controlled by imported Chint Electric.

Www.superbheater.com