Special thermocouples for waste incineration improve production efficiency and reduce cost consumption

Thermocouples for waste incineration use armored or high-temperature armored cores, equipped with wear-resistant sleeves of different materials and specifications, with good wear resistance, vibration resistance, and thermal shock resistance. The service life of the product can reach several times that of ordinary products in various harsh occasions with high wear, which greatly improves production efficiency and reduces cost consumption. Special heat-resistant and wear-resistant alloy materials are used as the measuring outer protection tube and wear-resistant head, and the armored core is installed inside. It has high corrosion resistance to fly ash particle erosion and can measure temperature between 0 and 1400℃ for a long time. It is an ideal temperature sensor used in high-temperature and wear-resistant environments in the metallurgical industry.

Waste incinerator is a device for incinerating and treating waste. The waste burns in the furnace and becomes waste gas that enters the secondary combustion chamber. It burns under the forced combustion of the burner*, and then enters the spray dust collector. After dust removal, it is discharged into the atmosphere through the chimney. The garbage incinerator is composed of four major systems: garbage pre-treatment system, incineration system, smoke biochemical dust removal system and gas generator (auxiliary ignition and incineration), integrating automatic feeding, screening, drying, incineration, ash cleaning, dust removal and automatic control. The garbage incinerator is a harmless treatment equipment commonly used in the harmless treatment of medical and domestic waste and animals. Its principle is to use the combustion of fuels such as coal, fuel oil and gas to burn and carbonize the objects to be treated at high temperature to achieve the purpose of disinfection.
Special thermocouples for garbage incineration are in the incinerator of the garbage power plant. Tens of millions of tons of garbage are burned here every day and provide heat energy for power generation. At the same time, the combustion temperature of the incinerator is also a very important temperature. At this time, thermocouples are needed to measure high temperatures, but some of the garbage itself is corrosive, and there are also particulates, etc. At this time, wear-resistant thermocouples are needed.
Thermocouples specially used for waste incineration are resistant to corrosion, high temperature and wear. The top of the thermocouple is made of high-temperature wear-resistant alloy and can be used for a long time at a temperature of 1200°C. The temperature sensing element is a high-temperature resistant armored core, and the cold end part in the wall-penetrating pipe is made of anti-corrosion stainless steel, which can resist acid corrosion caused by condensation.