The drying temperature of the vacuum dryer can be adjusted arbitrarily from 25°C to 80°C
Leave a message
The drying temperature of the vacuum dryer can be adjusted arbitrarily from 25°C to 80°C
⒈ Realize continuous feeding and discharging in vacuum state, and the feeding amount can be freely set as required. 2. The heating system can adopt various forms such as steam, hot water and electric heating to heat transfer oil heating.
3. The drying temperature can be adjusted arbitrarily from 25℃ to 80℃, and the material will be continuously discharged after 20 minutes to 60 minutes until the batch is completed.
⒋The crawler is made of Teflon material, which is stable and reliable in operation and has a uniform heating area. The crawler speed can be adjusted arbitrarily and the number of layers can be divided into 2-5 layers, which can be determined according to the user's output requirements.
⒌ The use of a variety of cloth devices can be adapted to the drying of various materials such as liquid, extract, powder and granular materials.
⒍It is equipped with an automatic crushing system under vacuum conditions, and the mesh number of dry particles can be arbitrarily selected according to the requirements of users.
⒎ Equipped with CIP in-place cleaning system, automatic cleaning is fast and convenient.
⒏The high-quality vacuum unit is selected and carefully designed and combined, which has a continuous large-capacity pumping rate and a stable vacuum degree.
⒐ Low energy consumption, no three wastes, low noise.
⒑ Fully meet the requirements of GMP certification.
Vacuum Dryer Vacuum Disc Type
The vacuum type disc continuous dryer can dry low temperature heat sensitive materials, such as medicines, enzymes, etc. The entire operation process is carried out under negative pressure. The wet material is added to the quantitative feeder, and the material is evenly fed into the dryer through the continuous lock for drying operation, and the dried material is discharged from the discharge port at the bottom of the dryer. The moisture escaping from the material is recovered by the condenser and the solvent receiving tank.
www.superbheater.com
