Twelve major characteristics of melt-blown cloth slitting machine:

1. The thick steel plates are welded to be firm and the angle is balanced, so that the machine is stable under high-speed working conditions.

2. The whole machine is made of chrome-plated steel pipes, each of which has undergone dynamic balancing treatment.

3. The unwinding adopts a 3-inch air-expansion unwinding shaft with a maximum unwinding diameter of 600mm. It is equipped with a magnetic powder tension controller and an automatic edge-aligning device.

4. The rewinding adopts 3-inch air-expansion reel and magnetic powder tension controller for rewinding, simple slitting operation, the maximum rewinding diameter can reach 600mm; the rewinding is beautiful and tidy

5. The cutting knife can use industrial surgical blade or flat knife (art cutter), adjustable knife between 18mm-1600mm.

6. The spindle and round knife use a stepless speed change system, which can be used as a high and low speed control and positive and negative switching control; electronic speed control system, by using the manual adjustment of the speed of the machine, it is convenient and simple.

7. Equipped with a double-sided diamond grinding knife system, the life of the grinding wheel can be as long as two years; the knife can be sharpened without disassembly, so that the blade can maintain sharpness for a long time; the best cutting quality is achieved; Keep the fabric and track clean.