What are the characteristics of precision coater and its daily maintenance

The precision coating machine is a coating machine, which is suitable for coating wood plywood plastic doors, windows, wood, rubber plates and other square and rectangular wall panels.
The coating machine is time-saving and labor-saving, and the frequency conversion coating and coloring coating are time-saving and labor-saving. It can be used separately or simultaneously for convenient recovery of UV coating. It is fast and convenient to adjust the feeding speed. It can be adjusted in conjunction with the coating speed
Main features of coating machine:
1. Frequency conversion coating and color coating are applied evenly, saving time and labor.
2. There are three sets of UV coating wheels, which can be used simultaneously or separately.
3. The UV coating wheel is easy to replace, just remove the fixing screws of the UV coating wheel to replace, saving time and effort.
4. UV coating recovery is fast and convenient.
5. The feeding speed can be adjusted with the coating speed. Almost synchronous linear speed.
The transmission and moving parts of the coating machine must be checked, fastened and oiled for maintenance within one week of use; In the future, regular inspection and maintenance must be carried out every month.
Basic maintenance:
1. The coating machine shall regularly check the screws at all parts of the packaging machine to avoid looseness.
2. The coating machine shall pay attention to the waterproof, moisture-proof, anti-corrosion and rat proof of the electrical parts. The electric control box and wiring terminal shall be kept clean to prevent electrical failure.
3. When the coater is stopped, the two heat sealing rollers should be in an open position to prevent scalding the packaging material.
The basic cleaning of the coater includes:
1. After shutdown, the metering part shall be cleaned in time, such as granulated sugar, Banlangen granules, salt, etc., and each shift shall be ensured to clean the blanking plate and rotary table to prevent corrosion.
2. The heat seal body should be cleaned frequently to ensure that the seal texture is clear.
3. Photo-electric tracking light-emitting head, that is, electric eye, should also be cleaned regularly to ensure small error of cursor tracking.
4. The materials scattered on the material tray should be cleaned in time to keep the machine parts clean.
5. Regularly clean the dust in the electric cabinet to prevent poor contact and other faults.
The coating machine must be operated by fixed personnel, who can skillfully master the startup and bag making procedures, and can easily debug the instrument, change parameters, etc; Work procedure, operation mode, working status, troubleshooting and handling of common faults; It is forbidden to operate the computer instrument of the coater without permission. Daily maintenance must ensure that the inside and outside of the computer instrument box are clean and dry.