What are the steps for installing the upper and lower water pipes of the water heater

1、 Installation steps of upper and lower pipes of gas water heater
1. Unpacking strip inventory accessories
When selecting and purchasing, disassemble the package of the gas water heater in front of the dealer, and check the three guarantee certificates, instructions, expansion pipes, wooden screw elbow joints, smoke pipes, corrugated pipes, water inlet valves, gas ball valves, and other small components of the main steering gear inside the package. For specific information, please refer to the instructions and check them one by one.
2. Pipe laying and valve installation
According to the previous reserved hole, insert the pipe into it. If the pipe is larger than the reserved hole, it is necessary to use an axe or other object to chisel the valve a bit larger to facilitate the smooth penetration of the pipe. For rough hole edges, it is necessary to cover them or fix them with glass adhesive.
3. Valve installation and flue setting
It is recommended to select a ball valve for the valve of the gas water heater to understand the gas pipeline of the water heater and the gas meter. This requires installing a triangular valve, and programming the gas pipeline that originally only supplied cooking utensils can simultaneously supply cooking utensils and dual channels of heat loss. As for the arrangement of smoke exhaust pipes, it is best to arrange the smoke exhaust pipes in front of the wall of the water heater, otherwise the position is not adjusted properly, which can easily cause safety hazards.
4. Fixed position, commissioning of gas water heater
In the final step of hanging the water heater onto the wall, determine the location, and drill holes and install expansion screws. Then, drill holes on the wall and install screws. After determining that the fixation is firm, cut the yellow hose outside the threaded pipe of the gas water heater to ensure aesthetics and safety and reliability in use.
2、 Installation precautions
1. Toilet water pipes generally pass through the roof, as this can reduce the chance of human damage, and the joints and outlets of cold and hot pipes must be parallel, usually with the heat pipe on the left and the cold pipe on the right. During design, the entire pipeline should be designed to avoid bending as much as possible, and should be transported away from the circuit as much as possible. The location and slope of the pipe clamp should also meet the requirements. Each valve should be installed smoothly to facilitate future use and maintenance.
2. When installing a hot water pipe, it is important to distinguish between the water inlet and outlet of the water heater. Connect the main valve at the water inlet and the pipe to the bathroom at the outlet. After installation, open the valve first to determine if there is any leakage, and then install a water faucet and shower head in the bathroom.
3. The bathroom is the darkest and most prone to moisture accumulation in the entire family, so ventilation is particularly critical. If you can design a window in the bathroom, it is best. If you do not have this condition, in order to prevent mold, moisture, and other phenomena in the bathroom, in addition to installing exhaust fans, you should also avoid the occurrence of "wrapping" phenomenon. Many people like to wrap the bathroom pipes tightly, This happens to cause moisture to be trapped in the pipe and cannot escape, making the humidity in the bathroom even more severe.

The above content is organized by Superb heater Company, super heater. Mainly professional production: industrial heating elements, temperature measuring elements, production equipment, accessories, and raw materials such as tubular heaters, tubular heaters, belt heaters, ceramic heaters, silicone rubber heaters, thermocouples, etc.

Welcome global industry partners to discuss cooperation!