L-shaped Single Tube Metal Electric Immersion Heater

Product Detail

We offer a variety of materials to match your application (titanium, 316 and 304 stainless steel, and plain steel) in sizes up to 36KW. Standard and custom configurations for over-the-side and bottom installations in open tanks. Thermal overtemperature protection standard (except screw plug), and our certifications include CE.

Product Descriptions:

1. The heaters are made of SUS304, SUS316 or titanium tubes with the shapes classified into vertical shape, "L "shape, "Z" shape, etc.

2. Power of the heater is designed according to installation location, liquid chemical properties and deposition of the solid-like contents in liquid.

3. Heaters of different power with different hot zone length and the cold zone length is flexible basing on customers' equipment requests. For safety design principle, hot zone of the heaters should be at least 100mm below the liquid level of the chemical plating tank.

4. Heaters power range from 500W to 36000W, voltages from 110V to 480V, both single phase and three phases are available.

5. All heaters are matched with overheat protection switch or PT100 heat detector.

6. All heaters are CE certificated with international quality standard, which insure the service life.

Types of Immersion Heaters

Immersion heaters are generally manufactured in one of two styles:

Flange-mounted immersion heaters feature hairpin tubular heating elements that are welded to a flange component. When installed, the flange component is matched to a flange that is welded into the tank's wall or nozzle. This type of immersion heater is often used to heat liquids in holding and storage tanks. It readily accommodates monitoring and control operations. The flange components are available in ANSI or custom designs.

Pipe thread heaters, also known as screw plug heaters, have hairpin bent tubular heating elements that are welded to a screw plug component. This type of immersion heater is suitable for freeze protection and process water heating operations in circulating fluid systems. Similar to flange-mounted immersion heaters, it is easily controlled and monitored. The pipe thread fitting generally complies with National Pipe Tapered (NPT) thread standards.

Typical Industrial Applications of Immersion Heaters

Immersion heaters find use in a wide range of industrial, commercial, and residential applications. They are often employed as electric water and other fluid heaters, air conditioners, ignition devices, instant hot water taps, rectors, steam generators, and more.

Within the industrial sector they are generally utilized by various plants and facilities, such as wastewater treatment centers, for one of the following:

Large-scale heating and/or melting operations

Process fluid temperature regulation

Freeze protection

Immersion Heaters From Pelonis Technologies

At Pelonis Technologies, we offer ultra-high-temperature ceramic immersion heaters suitable for a wide range of applications in both the industrial and commercial sectors. Our heaters demonstrate high thermal conductivity and greater heating efficiency (for both gaseous and liquid materials) than other metallic and non-metallic heating elements available in the market today. Some of the key features include:

Self-regulating

Can be used in air or water

Corrosion resistance (to acids and bases)

Minimal risk of water heater scale deposits

Electric insulation: <10 mA (even when broken)

Maximum heating range: up to 1200° C in 40 seconds

Heating efficiency: up to 98% (in water)

Watt density: <70 W/cm2 (in water) and <25 W/cm2 (in air)