Aluminum alloy melting furnace product introduction

Aluminum alloy melting furnace product introduction

 

This furnace type belongs to gas uncovered furnace, uncovered aluminum melting furnace, uncovered smelting furnace, etc. It is mainly used for the melting and batching of aluminum and aluminum alloys to ensure the casting and rolling process requirements.

 

Aluminum coil annealing furnace has a wide range of uses

 

This furnace type can not only reduce the hardness and soften the workpiece, but also refine the crystal grain, improve the mechanical properties of the workpiece, and reduce the deformation, cracking or crack tilt of the workpiece.

Rugged and durable aluminum coil annealing furnace

 

The annealing furnace is integrally cast with high-strength non-stick aluminum castable, which can increase the overall strength, wear resistance and thermal shock stability, and greatly extend the service life of the furnace.

High-efficiency and energy-saving aluminum coil annealing furnace

 

Users feedback that the furnace has a high utilization rate of charging materials, and a large number of annealing workpieces can be loaded and unloaded at one time, and energy is greatly saved.

Aluminum coil annealing furnace is safe and stable

 

Each burner is equipped with an independent and complete combustion controller, with automatic ignition, flame detection, fire extinguishing alarm and automatic gas shut-off. This fully guarantees the stability and safety of the combustion temperature control system.

Reliable sealing of aluminum coil annealing furnace

 

This annealing furnace not only inherits the advantages of compact structure and convenient operation of the traditional annealing furnace, but also has the characteristics of reliable sealing. It adopts integral casting and has no gap in the furnace.

Continuous carburizing furnace tank has the longest life of each model

 

The connected part is at the part where the cross-section changes. Due to the superposition of thermal stress and load response, and the bottom of the sealing ring is the supporting point of the entire furnace tank, the stress is greatest at this point during operation. Furthermore, this place is the hot spot of the casting, and there is more possibility of casting defects, so a ring-shaped crack perpendicular to the stress appears.

 

Comparing the service life of the furnace pot, the furnace pot life of Cr18Ni25Si2. Cr25Ni20 steel is the highest, which is more than three times that of the Cr18Mn12Si2N steel furnace pot.

www.superbheater.com