Home - Knowledge - Details

How to control the cooling temperature of the nitriding furnace?

After nitriding or nitrocarburizing using the multi-furnace gas method, if the furnace is cooled to below 200°C under ammonia protection before being removed from the furnace, furnace gas explosions do occur occasionally after the furnace lid is opened, but the severity varies.

Nitriding furnace explanation:

1. The basic furnace gas composition of ammonia, nitrogen, and hydrogen is ammonia. Both hydrogen and ammonia are flammable gases. When mixed with air within a certain ratio, they will ignite upon contact with an open flame (including sparks) or when the ignition temperature (above 510°C) is reached. This manifests as an explosion in a sealed container and a deflagration in an open container.

2. At this point, the furnace temperature is already below 200°C. Opening the furnace lid, even with air entering, should not cause gas combustion (deflagration) without an open flame.

3. However, there is a problem. Hydrogen is a strong reducing gas. As the furnace cools down, it will reduce the iron nitride in the form of fine particles (dust) scattered in the furnace tank into iron powder. We know that tiny reduced iron powder will be strongly oxidized and heated when it comes into contact with air. The temperature rises rapidly and becomes sparks. In addition, the activated carbon powder that may be deposited during the nitrocarburizing process will also oxidize and become sparks when it comes into contact with air. Sparks ignite the "hydrogen (ammonia)-air" mixture, resulting in explosion.

4. Prevention methods:

(1) Before opening the furnace cover, let some nitrogen into the furnace cover to dilute it and drive out the combustible gas before opening the furnace cover;

(2) Open the furnace cover carefully. The operator should not get close to the furnace body. Let the furnace gas escape for a while. Alternatively, throw a lit paper ball into the furnace tank to actively ignite the remaining combustible gas. After ensuring safety, lift the parts out.

info-908-902

Send Inquiry

You Might Also Like