How to maintain and maintain the tank body of vacuum electroplating electric heating pipeline?

How to maintain and maintain the tank body of vacuum electroplating electric heating pipeline?

The main difference between a vertical PVD vacuum plating line and a degree plating line is that the circuit boards are transported in different ways, and the maintenance and upkeep of the tanks are basically the same. 7d Stop cleaning once for each washing tank, clean the water tank once, stop cleaning once and replace the bath liquid; stop the spraying device of the tank to check once to see if there is any blockage, and stop dredging in time to prevent blockage; copper plating tanks and Conductive supports on tinning baths and contact locations for anodes and fronts. When you stop cleaning once, you can wipe it with a rag and sandpaper to stop polishing; stop copper plating tank, titanium basket and tin basket for tin plating tank. After inspection, replace the bad titanium basket bag and tin bar basket and add copper balls and tin bars. After adding the copper balls and tin bars at 7d, the electrolysis of the electroplated copper bath and the electroplated tin bath must be stopped. 7d also needs to use high current and low current mode to stop trial consumption so that after new copper balls and tin bars are added, the consumption performance is stable before the consumption is stopped. Cleaning of copper balls and anode bags should be stopped every 90 minutes. Activated carbon is used to filter and clean the bath every 120 to 150 days, filter out impurities in the bath, and stop cleaning the tin bath.

The improvement of the supervision level of the vacuum electroplating electric heating pipe industry

PVD vacuum electroplating enterprises continue to improve and perfect the production process and technical equipment. PVD vacuum electroplating products develop from low-end products to high-end products, and gradually realize the production of computer-controlled automatic PVD vacuum electroplating production lines to meet the development needs of high-end products.

Modernization of PVD vacuum plating equipment. The automation, intelligence and computerization of PVD vacuum plating equipment will help improve work efficiency, improve working conditions, reduce pollution and ensure the overall improvement of PVD vacuum plating product quality.

With the improvement of PVD vacuum electroplating industry supervision level, PVD vacuum electroplating equipment is developing in the direction of intelligence, which can realize remote monitoring and early warning of excessive discharge. Only in this way can the basic requirements for emissions be truly met.

www.superbheater.com