Introduction and use of oil drum heater

The oil drum heater, also known as the oil drum heating belt, is a relatively new silicone heating plate. The oil drum heating belt adopts the soft and bendable characteristics of the silicone heating plate. Metal buckles are riveted on the reserved holes on both sides of the heating plate, and spring buckles are used to buckle the barrel, pipe, and tank. It is easy and quick to install. The silicone rubber heating plate can be tightly attached to the heated part by the tension of the spring, heating quickly and with high thermal efficiency. The heating system solution for the new energy vehicle battery heater to solve the low temperature environment charging of the power battery: The silicone heating system is a very thin and relatively new pure resistive heating sheet, which is very soft and has a thickness of 1.5MM. The silicone rubber heater is mainly composed of nickel-chromium alloy heating wire and silicone rubber high-temperature insulation layer. The silicone rubber high-temperature insulation layer is a thin sheet made of silicone rubber and glass fiber cloth (standard thickness is 1.5mm), and the silicone rubber heater has good softness. It adopts the flexibility and flexibility of the silicone heating plate. Metal buckles are riveted on the reserved holes on both sides of the heating plate, and spring buckles are used on the tank, pipe, and tank. It is easy and quick to install. The tension of the spring makes the silicone rubber heating plate close to the heated part, heating quickly and with high thermal efficiency.

The barrel heating belt heating makes it easy to remove liquids and solids in the barrel, such as adhesives, grease, asphalt, paint, paraffin, oil and various resin raw materials in the barrel. Through heating in the barrel, its viscosity is evenly reduced, reducing the power of the pump. Therefore, the equipment is not affected by the season and can be used for barrels and tropical surfaces throughout the year. Sensors are installed to directly control the temperature through temperature regulation.

The oil barrel heater is used for heating, heating and insulation of barrel-shaped equipment such as tanks and pipelines. It can be directly wrapped around the heated part, and it is easy to install and disassemble. It is especially suitable for dissolving paraffin in winter and preventing oily objects from waxing. When the heater is suspended in still air at 20 degrees Celsius, the surface temperature is 150 degrees Celsius. Depending on the use environment, the temperature of the heater will vary according to the material and shape of the heated object.