The correct and reasonable use of this fully automatic terminal machine equipment can greatly reduce noise and vibration

The correct and reasonable use of this fully automatic terminal machine equipment can greatly reduce noise and vibration

Automatic terminal machine is a new equipment in recent years. It has a set of multifunctional machines that combine feeding, cutting, peeling, and crimping. It is a humanized and intelligent high-end technology product, suitable for large, medium, and small enterprises, and saves labor. To extend the service life of the fully automatic terminal machine, we need to maintain it well on a daily basis.

Automatic terminal machines are capable of cutting, peeling, and pressing wires, similar to computer wire stripping machines, and have functions for peeling and pressing detection. There are mechanical terminal machines (mostly domestically produced) and computer terminal machines (joint venture and imported) available on the market. Mechanical transmission is a measure of stability and accuracy that comes with mechanical transmission. The computer style uses track motion and servo motor operation, with excellent stability and accuracy.

During the processing of the terminal machine, it is possible to face poor contact. Of course, all the metal conductors inside the contact of the terminal machine are the main core components, and they mainly come from external power sources, or the voltage, current of cables, or signals are transmitted to the surface of connectors that match them for related processing and contact. Therefore, there must be more optimized structures in order to operate more stably and reliably, and they must ensure good conductivity. Therefore, if the structural design of the contact parts is unreasonable or the material selection is incorrect, the entire contact parts will basically have some poor contact.

In the process of using terminal machines for production and processing, the use of cutting tools is crucial. During the cutting process, the vibration of the cutting tools is mainly manifested in situations where the length size is longer and the workpiece is finer. During high-speed cutting, a lot of noise is generated, which can also be harmful to human health. Proper and reasonable use of this fully automatic terminal machine equipment can greatly reduce noise and vibration.

The vibration during the use of automatic terminal machines can be divided into three types: high-frequency vibration, intermediate frequency vibration, and low-frequency vibration. There are many methods to reduce vibration, such as using sharp tools, cutting slender workpieces at a 90 degree tool angle, adjusting cutting specific parameters, and arranging the process path of the tool reasonably.

Www.superbheater.com